[ RESUME EXAMPLE · 3 ROLES · 12 KEYWORDS TUNED ]
Electrician Resume Example
This electrician resume example shows a journeyman with commercial and industrial experience leading with license status and hours logged. It quantifies field work — feeders pulled, panels energized, zero lost-time incidents — and uses common construction posting terms such as NEC, conduit bending, 480V, PLC, and OSHA 30. Load it into the free builder, swap in your own hours and license number, and run the ATS check before you submit.
Ray Delgado
Journeyman Electrician
ray.delgado.elec@email.com · (214) 555-0168 · Fort Worth, TX · linkedin.com/in/raydelgadoelec
Summary
Journeyman electrician (Texas license #J-48291) with 10 years and 18,000+ documented hours across commercial and industrial projects. Energized 40+ distribution panels up to 480V with zero lost-time incidents. OSHA 30 and NFPA 70E certified, with PLC troubleshooting and conduit-bending specialization.
Experience
Journeyman Electrician · Lone Star Electrical Contractors
Apr 2021 – Present
Fort Worth, TX
- Lead crews of 3–6 apprentices on commercial TI projects ranging from $120K to $2.4M in electrical scope.
- Bent and installed 18,000+ feet of EMT, IMC, and rigid conduit across 14 build-outs with a 97% first-pass inspection rate.
- Terminated and energized 40+ panels and switchgear up to 480V, three-phase, with zero lost-time safety incidents.
- Cut material waste 22% by introducing a prefabrication layout for branch-circuit home runs.
Industrial Electrician · Meridian Industrial Services
Aug 2018 – Mar 2021
Arlington, TX
- Maintained and troubleshooted 460V motor control centers, VFDs, and PLC-controlled conveyance lines for a 600,000 sq ft plant.
- Reduced unplanned downtime 31% by rebuilding the preventive-maintenance schedule around vibration and thermography data.
- Wired and commissioned 12 new production cells, including 90+ motor starters and 340 field devices.
Apprentice Electrician · Cowan Residential Electric
Jun 2016 – Jul 2018
Denton, TX
- Logged 4,000+ apprentice hours on residential rough-in and service upgrades (100A–400A).
- Ran service calls solo in the final year, closing 150+ tickets with a 4.9/5 customer rating.
- Completed IEC apprenticeship classroom hours with a 94% average while working full time.
Education
Electrical Apprenticeship Program, IEC of Dallas (Independent Electrical Contractors) — 4-year program · 8,000+ on-the-job hours · NCCER certified
2020
Skills
NEC code compliance · Conduit bending (EMT, IMC, rigid) · 480V three-phase systems · Motor control centers · VFD installation · PLC troubleshooting · Blueprint reading · Switchgear termination · NFPA 70E arc-flash safety · Fire alarm wiring · Megger & multimeter testing · Project layout & prefabrication
Certifications
- Journeyman Electrician License #J-48291 · Texas Department of Licensing and Regulation · 2021
- OSHA 30-Hour Construction · OSHA Training Institute · 2022
- NFPA 70E Electrical Safety · NFPA · 2024
What a electrician resume has to show in the first six seconds
License type, state, and number — above the fold
Contractors cannot legally bill your hours without a current license, so this is checked before anything else. Put the license class, state, and number in the summary line ('Journeyman Electrician, Texas license #J-48291'), and repeat it in a certifications block with the year issued. Apprentices should state hours logged and classroom completion instead.
Hours logged and project scale
Electrical hiring reads in hours and scope, not years. '9,400 documented hours' and '$2.4M electrical scope' position you precisely; 'experienced electrician' does not. Name the project types — commercial TI, industrial maintenance, residential service — because contractors hire for the lane they work in.
Voltage and equipment specificity
480V three-phase, MCCs, VFDs, and PLC work separate industrial candidates from residential ones. List the exact equipment you have terminated, commissioned, or troubleshot. Recruiters matching a plant-maintenance opening scan for those terms literally.
Safety record, stated as a number
EMR-conscious contractors price safety directly. 'Zero lost-time incidents across 10 years' or '97% first-pass inspection rate' is evidence; 'safety minded' is not. OSHA 30 and NFPA 70E certifications belong in their own section with years.
Four ways electrician resumes get filtered out
✕ Leaving the license number off the resume.
FIX → Contractors verify licensure first. Put the class, state, and number in your summary and again in certifications. If your license is in progress, state your apprentice registration number and hours to date.
✕ Describing tasks instead of scope.
FIX → 'Installed conduit and pulled wire' describes the trade, not you. Replace it with scope: 'Bent and installed 18,000 feet of EMT/IMC across 14 commercial build-outs with a 97% first-pass inspection rate.'
✕ Mixing residential, commercial, and industrial without labeling.
FIX → Contractors hire for a lane. Separate your experience entries by project type and lead each bullet with the environment — a plant-maintenance recruiter skims past residential rough-in unless it is clearly a minor part of your history.
✕ One resume for every contractor.
FIX → An industrial maintenance posting wants PLC, VFD, and downtime metrics; a commercial TI posting wants conduit footage, panel counts, and inspection pass rates. Reorder your bullets per posting and run the checker on this page against the real ad to see the keyword gaps.
Common questions
Should I list my apprentice hours on a journeyman resume?
Total hours, yes — '18,000+ documented hours' is a credibility marker even after licensure. Hour-by-hour apprentice detail, no: once you hold the license, lead with licensed work and keep the apprenticeship to one short entry showing where you trained and that you completed the program.
How do I handle experience across multiple states?
List every state license you hold with its number and status, and note reciprocity where it applies ('Texas journeyman; Oklahoma reciprocity application filed'). Multi-state contractors screen for this directly, and an honest status line beats a gap a background check will find.
Do certifications like OSHA 30 actually matter to the ATS?
Yes — large contractors and all industrial owners run keyword filters for OSHA 30, NFPA 70E, and first-aid/CPR before a recruiter reads the file. List them in a dedicated certifications section with issuer and year, and repeat OSHA 30 in your skills line if the posting names it.
Should I include a tools section?
Fold tools into skills rather than a separate list, and only name what you actually run: meggers, thermography cameras, benders (Greenlee, Ideal), ProPress. A 30-item tool inventory reads as padding; eight specific, defensible tools read as competence.
How do I tailor this example to a specific posting?
Copy the example into the builder, replace the content with your own hours and license, then paste the job posting into the ATS checker. It lists the posting's keywords you are missing — add the truthful ones (say, 'fire alarm' or 'solar PV') to your skills and bullets, and re-scan. As a rough rule of thumb many people aim for a match around 80%, but there is no universal passing score — treat it as a 'looks strong' guideline, not a guarantee or a target every employer shares.